perkins 404c-22 service manual

KEC - 103.15 103.15 (I) word (KEC) perkins engine - Spare parts catalog clash 260139, kEG - 103.15 103.15 (KEG) globalization perkins engine - Spare parts catalogue 260140, manual kF - 104.19 104.19 (KF) perkins engine - Spare parts catalog 260141 KFC - 104.19 104.19 (I) (KFC) perkins engine.
Do not operate or perform any lubrication, maintenance gems or repair on this clash product, until you have read and understood the operation, lubrication, maintenance and repair information.
Notice Do not let the tops of fuel injectors turn when the fuel line nuts are loosened or tightened.
If necessary, replace the electric transfer pump.Install the correct thickness and the correct number of shims on the mounting face of the cylinder clans block.6 kenr6226-01 Disassembly and Assembly Section g01303701 Illustration manual 3 Typical example.The specifications, torques, pressures, measurements, adjustments, illustrations, and other items can change at any time.Note: Place identication marks on all tube assemblies for installation.Remove manual crack fuel injection pump (1) from the cylinder block.Series Perkins 500 Series.Remove the fasteners and the spacers (not shown) for tube clips clans (6).Tighten the plugs to a torque of 23 Nm (17 lb ft).Remove gasket (18) from the turbocharger.13 Fuel Injector - Remove and Install.Installation procedure manual notice Keep all parts clean from contaminants.Remove bolts (2) and remove electric transfer pump (3).Position fuel injection pump (1) close to the mounting face of the cylinder block, and connect link (6) and fuel rack control (5) with clip (7).The engine will gems be damaged if a defective fuel injector is globalization used because the shape of fuel (spray pattern) that comes out of the nozzle will not be correct.32 Water Pump - Remove and Install (402D-05 and 403D-07 Engines) 33 Water Temperature Regulator Housing - Remove and Install 35 Water Temperature Regulator - Remove and Install (402D-05 and 404D-07 Engines).Install fuel shutoff solenoid (1) into the fuel injection pump housing by rotating the fuel shutoff solenoid in a clockwise direction.I02645771 Turbocharger - Remove and Install Removal procedure notice Care must be taken to ensure that uids are contained during performance of inspection, maintenance, test- ing, adjusting and repair of the product. Refer to Operation and Maintenance Manual, Fuel System - Prime.
If necessary, remove fuel lter element (5).

62 Rocker Shaft - Disassemble (403D-15, 403D-15T, 403D-17, 404D-22, 404D-22T and 404D-22TA Engines) 62 Rocker Shaft - Disassemble (402D-05, 403D-07, 403D-11 and 404D-15 Engines).
Plug all hoses and all the ports in the fuel transfer pump.
Use Tooling perkins 404c-22 service manual (A) to tighten union nuts (1) at the fuel injection pump.