A test page prints after the game printhead is cleaned.
Solution three: Check the thrones print settings.
Note: Incorrect bundling of the ink tubes does not directly cause print quality problems, but it is an issue that must be thrones corrected.Green block rover has lines replace the Black/Yellow printhead.Wait until the carriage is idle and game silent.Press the Setup button.For documents with jawbreaker dense printing, such as high contrast graphics or photographs, use HP Advanced Photo Paper for the best results.Hardware and software diagnostics, hP/Non-HP ink and/or HP/Non-HP Toner, number of pages printed.HP recommends that you slingbox do not leave the cartridges outside the printer longer than 30 minutes.Note: Keep a print sample that shows the problem.Many non-HP troubleshooting media could be incompatible with HP inks software and printing systems.Some media may not absorb ink as well as others.Figure : Plain paper with ColorLok technology is recommended for text printing.The problem might not appear on the other end of the printout.If the carriage does not move to the left side, install press and hold the OK button until the carriage moves.Figure : Streaked black, red, or green color blocks - replace Black/Yellow Printhead Cyan block service has lines replace the Magenta/Cyan printhead.If the grey blocks in Test Pattern 3 display dark lines or white gaps where the arrows are manual pointing, follow the steps to calibrate the linefeed.Try using a different paper.Step three: Use an automated tool to align the printhead Follow game these steps to align the printhead. Load only game clean, wrinkle-free paper into the product.
HP designs ink and paper to work together.
Images that have been enlarged too much might appear fuzzy or blurry.

If any of the color blocks in Test Pattern 2 show white lines or are faded or missing completely, continue with the steps to clean the printhead.
To check the warranty on your ink or toner supplies, go to Printer and Page hp 8500 all in one printer manual Yield Overview, and then review the limited warranty information for your supplies.